Synergy Manufacturing: Jeep JL / JLU / JT HD Adjustable Front Track Bar

509,00

Jeep Wrangler JL / JLU / JT Heavy Duty Adjustable Front Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift.

Ships in 24h

    Description

    Jeep Wrangler JL / JLU / JT Heavy Duty Adjustable Front Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. This track bar also significantly improves lateral stiffness over stock, and is seen as a required upgrade to eliminate the factory track bar from contributing to steering shimmy or death wobble, even on stock vehicles. Considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. Uses maintenance free Synergy Dual Durometer Bushings on both ends. Bent to clear the Synergy Sector Shaft Brace and most aftermarket differential covers. Pair with Synergy’s Drag Link, Tie Rod, and Sector Shaft Brace to bullet-proof your steering and guarantee product compatibility from stock height to 3 plus inches of lift.

    Fits:

    2018+ Jeep Wrangler JL / JLU
    2020+ Jeep Gladiator JT
    Benefits:

    Eliminates the track bar from contributing to steering shimmy or death wobble
    Allows centering of front axle when running a suspension lift
    Adjustable without removing from vehicle
    Maintenance Free, no greasing required
    Synergy Dual Durometer Bushings eliminate binding issues associated with stock vulcanized bushings
    No jam nuts that are impossible to keep tight
    No modifications required to install
    Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
    Compatible with Synergy HD Steering and Sector Shaft Brace
    Bent to clear most aftermarket differential covers
    Limited Lifetime Warranty
    Features:

    Made from high quality 1.50 inch x .250 wall DOM
    Retains factory track bar mounting bolts & hardware
    Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
    Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
    Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
    100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
    Notes:

    Compatible from 0-4 inches of lift in the stock mounting locations with no bump stop spacing required. Front track bar relocation bracket and high steer are recommended for lifts 3 inches and over and require 3 inches of bump stop spacing
    The replacement adjustable joint is 4812-01 and the replacement bushings are 4327-01
    Min/max lengths: 33.75 / 34.50 inches

    Additional information

    Weight7 kg
    Dimensions120 × 30 × 15 cm
    Manufacturer

    kod produktu

    8875-01

    Model

    ,

    Lift height

    , , , , , , , , , , ,

    Chassis type

    , ,

    Trim

    , , , ,

    Engine

    , , , , ,

    Reviews

    There are no reviews yet.

    Be the first to review “Synergy Manufacturing: Jeep JL / JLU / JT HD Adjustable Front Track Bar”

    Your email address will not be published. Required fields are marked *