Teraflex: JK 2dr: Falcon SP2 3.3 Fast Adjust Piggyback Shock Kit (1.5-2.5” Lift)

2.571,00 inc. VAT

JK 2dr: Falcon SP2 3.3 Fast Adjust Piggyback Shock Kit (1.5–2.5” Lift)

Out of stock

SKU: TX-02-02-33-400-002 Category:

    Description

    Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability with their easy to use 3-Position Fast Adjust Knob. Settings include Soft, Custom, and Firm. The Custom setting incorporates an 8-Position Micro Adjust Dial for more precise tuning between Soft and Firm. “High-Value Performance” is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs. Falcon Performance Shocks by TeraFlex. SP2 3.3 Fast Adjust: • SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics • 3-Position Fast Adjust Knob for large damping adjustments • Settings: Soft, Custom, Firm • Custom setting includes an 8-Position Micro Adjust Dial for finer damping adjustments • Ideal for daily driven Jeeps as well as the serious enthusiast wanting to adjust damping for all driving conditions JK: • JK corner-specific shock absorber w/ race-inspired performance • Front upper offset stud design provides maximum shock body to frame clearance during articulation • Outboard mounting increases clearance for lifted vehicles w/ raised track bar brackets • Rear shock body (all) and reservoir (piggyback) positioned on bottom eliminates shaft damage from rocks kicked up by the tires • Rear Shock Skid Plates available separately Piggyback: • Piggyback design increases oil and gas capacity for reduced heat • Moving gas charge to piggyback reservoir allows maximum amount of travel • Flows 6x more oil than restrictive reservoir hose designs • Eliminates common leakage issues found in banjo and swivel fittings • Front shock’s unique horizontal piggyback reservoir increases tire clearance • Cartridge Upgrade Kits are available separately — contact customer service for details

    SP2 Mode Adjust:
    • Choose between Soft and Performance modes during install
    • Tunes both compression and rebound
    • Soft mode allows a partial bypass of the main piston for a softer ride
    • During aggressive driving, Soft mode retains performance tuning for optimal handling
    • Soft mode recommended for rough terrain/surfaces and cold weather
    • Performance mode recommended for max on- and off-road handling, stability, and control
    Falcon Jeep Shocks (all):
    • Vehicle-specific shock absorbers
    • Race-inspired performance for increased vehicle stability
    • Improved dynamic roll control and low-speed damping
    • Dramatic improvement in on-road comfort and off-road performance
    • Optimized fitment for unobstructed suspension travel and articulation
    • 2.3” shock body provides optimal performance (Series 2 and Series 3 Shocks)
    • 2.125” shock body for high value performance (1.1 Monotube Shocks
    • 6061-T6 aluminum alloy shock body resists Impact to protect internal components
    • Smooth honed internal shock body surface for long-term performance
    • 3/4” (Series 2 and Series 3 Shocks) or 1/2” (1.1 Monotube Shock) induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
    • Large shaft diameter provides a wide range of adjustment on adjustable shocks
    • 1-piece energized Teflon bronze piston wear band
    • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
    • VOD reduces shock bottoming at full compression or over uneven terrain
    • OGS (Oil/Gas Separator) prevents cavitation
    • Red Line oil for consistent performance across all temperatures
    • Synthetic formula also contains special anti-wear and lubricity agents
    • 1,000-hour salt spray corrosion resistance test on all hardware
    • Serviceable and rebuildable (factory serviced)
    • Designed, engineered, CNC machined, and assembled in-house from domestic and globally sourced components
    • Patented design
    • 3-year warranty

    Additional information

    Manufacturer

    Model

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.